Faber 5003 Tone Lock Master Kit Inch US Spec ABR1 Aged Gold
All Pro Sustainer System™ parts can now be ordered in one convenient “Master Kit,” at a 5% discount over buying the parts separately. The Tone-Lock™ MASTER KIT includes Tone-Lock™ studs and spacers, a TP-59 tailpiece and a Tone-Lock™ Bridge.
This is the kit to buy to completely upgrade your ABR-1 equiped guitar (i.e., Gibson Historics and any guitars using ABR-1 style 6-32 threaded bridge posts). Nashville bridge equipped guitars will require the Faber® BSWKIT™, iNsert™, or NSWKIT™ to install the “Tone-Lock”™ Bridge.
Standard in this Master Kit:
Tone-Lock™ Bridge – Standard Matching Pre-Notched Saddles
- Alloy: 70% zinc, 30% aluminum
- Length: 3.31″/84.1mm
- Saddle radius: 12″
- Post spacing: 2.91″/74.0mm (0.8mm lock nut clearance to accommodate 73.6mm-74.4mm post spacing)
- Post hole diameter (stepped): upper, .293″/7.45mm; lower, .2165″/5.5mm
- String Spread (center-to-center, outer saddles): 2-1/16″/2.0625″/52.39mm
TP-’59 Tailpiece – Lightweight Aluminum stop tailpiece
- Material: Aluminum, plated
- Weight: 1.0 oz./28.45g
- Overall length: 3.987″/101.27mm
- Stud spacing: 3.25″/82.55mm
- Stud opening: .32″/8.1mm
Tone-Lock™ INCH – Tone-Lock™ studs/spacers 5/16-24 for all Gibson
- Material: Steel, plated
- Weight (pair without spacers): .88 oz./25g
- Overall Length: 1.378″/35mm
- Thread length: .906″/23mm
- Thread pitch: 5/16-24
- Head diameter: .51″/13mm
- Head thickness: .157″/4.0mm
- Spacers, two each: diameter: .51″/13mm, thickness: .099″/2.5mm; .157″/4.0mm; .217″/5.5mm
Lock Nut/Tailpiece Stud Tool – Corsa Faber Locknut Tool
For tightening tailpiece studs without damaging the plating, as is possible using a conventional screwdriver. Use as shown for tailpiece studs. For Tone-Lock™ bridge lock nuts, use the unnotched end when the top of the bridge stud is below the lock nut slot; use the notched end when the bridge protrudes into the lock nut slot. Included FREE with Tone-Lock™ Bridges, Tone-Lock™ Kits, & Tone-Lock™ Master Kits.
Tone-Lock™ Lock Nuts – Pair of ABR-1 6-32 lock nuts
A pair of Lock Nuts for Tone-Lock™ bridge, in either 4mm or ABR-1 thread, depending upon the application.
